Celebrating 50 Years of Excellence
Back to Journal
Commissions4 min read

Commissioning freestanding furniture

A freestanding piece stands on its own feet. A sideboard, a dining table, a chest of drawers, a bookcase you can shift when the room changes. It is not scribed into an alcove and it is not fixed along a wall. You can move it to sweep behind it. If you leave the house, it can leave with you. That single fact is why a commission of this sort exists.

Why the piece is not built in

People ask us for freestanding furniture for plain reasons. The house is rented, or it is a fine room you do not want lined with carcases. There is no chimney breast to fill, just a wall that wants one good piece against it. A hall needs somewhere for keys, post and a lamp, and a fitted cupboard would be too much building for the space. A dining room needs a table of a particular length, because the one in a shop is a fraction too long for the chairs you already have, or a fraction too wide for the walk past the sideboard.

These are commissions. One piece, for one room, made at our family workshop. R.E. Woods & Son has been that workshop since 1976, in Thuxton, Norfolk. Freestanding furniture is made here alongside the bespoke kitchens, the fitted wardrobes and the joinery, and it goes out to homes across Norfolk, East Anglia, London and the Home Counties.

What we need to know

A commission starts with the job the piece has to do. A sideboard for serving wants a top that will take a tray, and a cupboard for the things that should disappear between meals. A chest wants drawers that still run true when your hands are full. A table wants a height and a length that suit the chairs and the room, with enough overhang that a person can sit down without catching a leg on the frame. A bookcase wants shelf heights for the books you own.

Tell us those things, and the timber. European oak is the timber we use when the grain is meant to show and the piece has to take daily knocks. Walnut is quieter and darker, and we have made a freestanding sideboard in it. Painted hardwood is the choice when the piece should sit back and let the room speak, finished in Farrow & Ball. Hinges and runners, where the piece has doors or drawers, are Blum.

You can arrive with a room, a measurement, and a clear sense of what is annoying you. You do not need a drawing of your own. We measure what matters, we draw the piece, and we agree it before anything is cut. The order is the same one set out on the process page.

How solid timber behaves

Solid timber moves. Across a year the humidity in a British house changes, and a wide top tries to expand and shrink across the grain. We build for that. A top is fixed so it can move a little. A drawer is fitted with a clearance that still feels right in August and in January. A door in a solid frame is made so the season does not leave it stuck or rattling. This is ordinary cabinetmaking, and it is the reason a commissioned piece stays square.

The piece is made at the workshop on Dereham Road. Where it needs setting in place, levelling, or the doors hung after the journey, we do that in the house. Where it is simply stood where you want it, we do that and no more. We do not fix it to the wall unless you have asked us to, because the point of freestanding furniture is that it remains free.

When fitted is the better answer

Fitted furniture is the right answer when the storage is the wall itself. A wardrobe to the ceiling, or alcove cupboards and shelving beside a chimney, will hold more than a sideboard and will look as if they were always part of the house. We make both, in the same workshop. If a freestanding piece would leave you with a gap you then have to live with, we will say so. The point of asking a cabinet maker is to get the piece the room needs, which is not always the piece you first named.

The range of fitted and freestanding work sits on the bespoke furniture page, with the services page beside it if the commission turns out to include a kitchen or joinery. To start, use the contact page or ring 01362 850460. The workshop is at Mountain Ash, Dereham Road, Thuxton, Norfolk, NR9 4QH, open Monday to Friday, 8am to 5pm. Tell us the town, the room, and what the piece has to do.